Что за неисправность SRS B1150 ???
Модератор: alflash
Что за неисправность SRS B1150 ???
Lexus RX 330 2005 американец, горит лампа AirBag. неисправность одна - B1150 - не стирается. Подскажите пожалуйста что за неисправность, и что с ней делать?
Код неисправности B1150 записывается в память компа SRS, если обнаружено, что Occupant Classification System* Malfunction, т.е. неисправность в этой системе. Поэтому считайте коды её неисправности и продолжим.
Прим1. К сожалению эта система не поддерживает считывание кодов неисправности с помощью "скрепки", поэтому нужен более-меее приличный сканер.
Прим2. Чаще всего достаточно только INITIALIZATION* ("ZERO POINT CALIBRATION").
* The front passenger occupant classification system judges whether the front passenger seat is occupied by an adult or child (with child seat) or is unoccupied, in accordance with the load that is applied to the front passenger seat and whether the seat belt is buckled. Thus, it restricts the deployment of the front passenger airbag, front passenger side airbag, and the front passenger seat belt pretensioner. In addition, the system informs the driver of the result of the judgment through the use of the AIRBAG ON/OFF indicator lights.
** ZERO POINT CALIBRATION
NOTICE: Make sure that the front passenger seat is not occupied before performing the operation.
HINT: Perform the zero point calibration and sensitivity check if any of the following cond itions occur.
• The occupant classification ECU is replaced
• Accessories (seatback tray and seat cover, etc.) are installed
• The front passenger seat is removed from the vehicle
• The passenger airbag ON/OFF indicator ("OFF") comes on when the front passenger seat is not occupied
• The vehicle is brought to the workshop for re pair due to an accident or a collision.
Например,
, 
Прим1. К сожалению эта система не поддерживает считывание кодов неисправности с помощью "скрепки", поэтому нужен более-меее приличный сканер.
Прим2. Чаще всего достаточно только INITIALIZATION* ("ZERO POINT CALIBRATION").
* The front passenger occupant classification system judges whether the front passenger seat is occupied by an adult or child (with child seat) or is unoccupied, in accordance with the load that is applied to the front passenger seat and whether the seat belt is buckled. Thus, it restricts the deployment of the front passenger airbag, front passenger side airbag, and the front passenger seat belt pretensioner. In addition, the system informs the driver of the result of the judgment through the use of the AIRBAG ON/OFF indicator lights.
** ZERO POINT CALIBRATION
NOTICE: Make sure that the front passenger seat is not occupied before performing the operation.
HINT: Perform the zero point calibration and sensitivity check if any of the following cond itions occur.
• The occupant classification ECU is replaced
• Accessories (seatback tray and seat cover, etc.) are installed
• The front passenger seat is removed from the vehicle
• The passenger airbag ON/OFF indicator ("OFF") comes on when the front passenger seat is not occupied
• The vehicle is brought to the workshop for re pair due to an accident or a collision.
Например,
,